page_banner

Insulating Adhesive & Paint

  • Generator Epoxy adhesive DFCJ1306

    Generator Epoxy adhesive DFCJ1306

    Generator Epoxy adhesive DFCJ1306 is a mixture of insulating paint and fillers, widely used in industrial equipment such as power plants, metallurgical plants, and steel mills, for anti-corona treatment of high-voltage motor stator coils. Ensure the safe operation of on-site equipment.
    Brand: YOYIK
  • High resistance anti corona paint DFCJ1018

    High resistance anti corona paint DFCJ1018

    High resistance anti corona paint DFCJ1018 is made by grinding carbon black as the main raw material, and then mixing it with insulation varnish and an appropriate amount of desiccant. It is suitable for anti-corona use in high-voltage motors and electrical appliances, such as at the end of coils with high voltage in large high-voltage motors.
    Brand: YOYIK
  • RTV Silicon steel sheets adhesive J0705

    RTV Silicon steel sheets adhesive J0705

    RTV Silicon steel sheets adhesive J0705 is a two component curing adhesive. Composed of low viscosity epoxy resin and curing agent. Before use, the two components need to be mixed evenly and coated with a brush on the end face of the stator core or between silicon steel sheets.
    Brand: YOYIK
  • Generator RTV epoxy adhesive J0792

    Generator RTV epoxy adhesive J0792

    Generator RTV epoxy adhesive J0792 is a two component epoxy impregnating paint mainly used for on-site impregnation treatment of generator winding binding tapes and gasket materials. After brushing, it can improve the insulation performance and mechanical strength of the binding tapes, and extend their service life. At the same time, it can also be used for the treatment of insulation components, improving their insulation performance and enabling them to adapt to high temperature and high voltage working environments. If it is necessary to accelerate the drying progress, heating drying can be carried out to improve work efficiency.
    Brand: YOYIK
  • Generator stator RTV epoxy adhesive J0708

    Generator stator RTV epoxy adhesive J0708

    Generator stator RTV epoxy adhesive J0708 is a two component epoxy adhesive composed of A and B components. It is suitable for insulation treatment at motor stator bar joints, connecting wire joints, etc. When using room temperature mica tape semi laminated insulation, the mica tape is applied between layers. It has excellent insulation performance and good adhesion. The heat resistance level is F grade.
    Brand: YOYIK
  • Surface cover epoxy air-dry varnish 1504

    Surface cover epoxy air-dry varnish 1504

    Surface cover epoxy air-dry varnish 1504 is epoxy ester insulation paint mainly suitable for surface coating of steam turbine generators, water turbine generators, AC/DC motors, and other electrical products. This product has advantages such as high mechanical strength and good dielectric properties.
    Brand: YOYIK
  • Stator coil surface HR anti-corona varnish 1244

    Stator coil surface HR anti-corona varnish 1244

    Stator coil surface HR anti-corona varnish 1244 is a single component semiconductor insulation paint that is applied to the surface of the motor stator coil, or on asbestos tape or glass fiber tape, wrapping the outer layer of the coil, or on glass cloth to form a one-time insulation, achieving the purpose of anti-corona.
    Brand: YOYIK
  • Solvent-free RTV Epoxy adhesive 53841YR

    Solvent-free RTV Epoxy adhesive 53841YR

    Solvent-free RTV Epoxy adhesive 53841YR is a solvent-free two-component room temperature curing coating adhesive mainly used for impregnating the binding tape of the stator winding end of steam turbine generators, as well as the impregnation coating of conformal felt. This product is a two component room temperature curing adhesive mainly composed of low viscosity epoxy resin, fillers, and liquid amines.
    Brand: YOYIK
  • Insulating box filling adhesive J0978

    Insulating box filling adhesive J0978

    Insulating box filling adhesive J0978 is a two-component room temperature curing pouring adhesive prepared from epoxy resin, special inorganic fillers, and curing agents for generator insulation boxes. This epoxy adhesive refers to an electronic adhesive or adhesive that can seal or package some components (such as resistive and capacitive circuit boards in the electronics industry). After packaging, it can play a waterproof, moisture-proof, shockproof, dustproof, waterproof, heat dissipation, and sealing role.
    Brand: YOYIK
  • Generator room temperature curing adhesive HDJ-16

    Generator room temperature curing adhesive HDJ-16

    Generator room temperature curing adhesive HDJ-16 is a two component room temperature curing coating adhesive mainly composed of epoxy resin and curing agent. The content of organic volatiles meets the standards set by the National Environmental Protection Agency. Store at room temperature, away from heat sources, and avoid direct sunlight.
    Brand: YOYIK
  • Gas turbine cleaner ZOK-27

    Gas turbine cleaner ZOK-27

    Gas turbine cleaner ZOK-27 is suitable for various types of gas turbines and is a necessary product for compressor manufacturers and gas turbine users. It can be cleaned online and offline, with strong cleaning and anti-corrosion completed simultaneously. It contains unique corrosion inhibitors and is biodegradable, making it an efficient, fast, and environmentally friendly cleaning agent. The use of ZOK27 gas turbine cleaning agent can greatly extend the service life (rust prevention) of the compressor and reduce operating costs.
  • Epoxy-ester air-drying red insulating varnish 9130

    Epoxy-ester air-drying red insulating varnish 9130

    Epoxy-ester air-drying red insulating varnish 9130 is suitable for anti-covering coating of the insulation surface at the end of the stator winding (winding) of high-voltage motors and spraying insulation on the surface of the rotor magnetic poles. Technical indicators Appearance: The color is uniform, free of foreign mechanical impurities, and the color is iron red. The curing content is 50-60%, and the drying time is less than or equal to 24 hours at 23 ℃.
    Brand: YOYIK
12 Next > >> Page 1 / 2