page_banner

Other Sensor

  • Boiler Air Preheater Infrared array probe HSDS-30/T

    Boiler Air Preheater Infrared array probe HSDS-30/T

    The Infrared array probe HSDS-30/T uses infrared signals to monitor the surface temperature of heating components. When the measured temperature is 150-200 ℃, it triggers an alarm and takes necessary measures to nip the fire alarm in the bud before reaching the metal ignition temperature, thereby protecting the safety of boiler equipment and personnel.
    Brand: YOYIK
  • Magnetic reed switch (sensor) CS1-F

    Magnetic reed switch (sensor) CS1-F

    Magnetic reed switch (sensor) CS1-F means induction through a magnet. This "magnet" is a magnet, and there are several types of magnets available. Commonly used magnets in the market include rubber magnets, permanent magnet ferrite, sintered neodymium iron boron, etc. Used for counting, limiting, and so on (mainly used for the production of door magnets and window magnets), and also used in various communication devices. In practical applications, permanent magnets are usually used to control the connection or disconnection of these two metal plates, hence they are also known as "magnetrons".
    Brand: YOYIK
  • Oil Water Alarm Level Switch OWK-1G

    Oil Water Alarm Level Switch OWK-1G

    The oil water alarm level switch OWK-1G is used to detect the interface position of oil and water in the liquid. When the liquid level rises to the set position, the travel switch will trigger a signal, which can be used to control the operation of oil-water separation equipment and monitor the diffusion of oil pollutants. It plays an important role in oil-water separation systems, improving separation efficiency and protecting equipment and the environment.
    Brand: YOYIK
  • Boiler Water level indicator electrode DJY2212-115

    Boiler Water level indicator electrode DJY2212-115

    The electrical contact of DJY2212-115 Boiler Water level indicator electrode is a conductive liquid controlled component, which is sealed with 99.9% high-purity alumina ceramic tube and alloy steel using a special gold ceramic welding process. It is firm, reliable, responsive, and accurately controlled.
    Brand: YOYIK
  • Duplex Armored Thermocouple WRKK2-221

    Duplex Armored Thermocouple WRKK2-221

    Duplex Armored thermocouple WRNK2-221 Armored thermocouple refers to the insulation material and metal protective sleeve wrapped around the thermocouple wire like armor. The function of armor is to protect the thermocouple wire and add a protective layer outside the thermocouple, such as stainless steel pipes, nets, etc., to prevent corrosion in acidic, alkaline, and other environments.
    Brand: YOYIK
  • Platinum thermal resistance temperature sensor WZPM2-08-75-M18-8

    Platinum thermal resistance temperature sensor WZPM2-08-75-M18-8

    The WZPM2-08-75-M18-8 platinum thermal resistance temperature sensor uses imported platinum resistance components, integrating good production technology, excellent testing methods, and years of manufacturing experience. This product meets the national standard ZBY-85 (equivalent to the IEC751-1983 standard of the Electrical Commission) and can be widely used in industries such as petroleum, chemical, power plants, metallurgy, light industry, food, scientific research, and machinery.
    Brand: YOYIK
  • Armored Thermocouple WREK2-294

    Armored Thermocouple WREK2-294

    Armored Thermocouple WRNK2-294 can measure temperatures up to 1000 ℃. The thermocouple WRNK2-294 consists of two different conductors/metals A and B, forming a loop. When the measured temperature change, a thermoelectric electromotive force is generated in the circuit, it will form a thermal current, which is called the thermoelectric effect. Its wiring method is a dual wire thermocouple, which is one of the commonly used temperature detection components in industry.
    Brand: YOYIK
  • APH Gap Control System Gap Sensor Probe GJCT-15-E

    APH Gap Control System Gap Sensor Probe GJCT-15-E

    The key problem of air preheater seal clearance control system is the measurement problem of preheater deformation. The difficulty lies in the fact that the deformed preheater rotor is moving and the temperature inside the air preheater is close to 400 ℃, while there is also a large amount of coal ash and corrosive gas inside. It is very difficult to detect the displacement of moving objects in such harsh environments.
    Brand: YOYIK
  • Limit Switch ZHS40-4-N-03K Inductive Proximity Switches

    Limit Switch ZHS40-4-N-03K Inductive Proximity Switches

    The limit switch ZHS40-4-N-03K is a precision inductive proximity switch based on a precision stable amplitude integrated circuit oscillator. Compared to traditional inductive proximity switches that generate switch signals based on oscillator start and stop, its positioning accuracy, time and temperature stability, and long-term reliability are significantly improved.
    Brand: YOYIK
  • Ultrasonic Level Meter Probe CEL-3581F/G

    Ultrasonic Level Meter Probe CEL-3581F/G

    The CEL-3581F/G ultrasonic level Meter Probe is generally used in conjunction with the CEL-3581F/G level gauge. This product is customized for power plants and meets the requirements of on-site working conditions. Its function is to measure the level of oil tanks.
    The ultrasonic level gauge probe CEL-3581F/G of the main oil tank is set to output a maximum distance of 4mA and a minimum distance of 20mA. Multiple sensors are available for users to choose from, so you must choose the sensor that meets the requirements based on the application status, otherwise the instrument may not meet the usage requirements or be damaged.
  • Bimetal Thermometer Gauge WSS-411

    Bimetal Thermometer Gauge WSS-411

    WSS-411 Bimetal Thermometer Gauge is a field detection instrument used for measuring medium and low temperatures of steam turbine bearings, which can be used to directly measure the temperature of liquefied and gas. Compared with glass mercury thermometers, it has the advantages of being mercury free, easy to read, and durable. Its protective tube, joint, locking bolt, etc. are all made of 1Cr18Ni9Ti material. The case is made of aluminum plate stretch molding and has a black electrophoretic treatment on the cutting surface. The cover and case adopt a circular double-layer rubber ring screw sealing locking structure, so the overall waterproof and anti-corrosion performance of the instrument is good. The radial type instrument adopts a curved pipe structure, with a novel, lightweight, and unique appearance.
    Brand: YOYIK
  • RTD thermocouple temperature sensor probe WZP2-231

    RTD thermocouple temperature sensor probe WZP2-231

    The RTD thermocouple temperature sensor probe WZP2-231 has the characteristics of bending resistance, high temperature resistance, fast thermal response time and durability. Like the industrial thermocouple, it is used as a temperature sensor, which is usually matched with display instruments, recording instruments and electronic regulators. At the same time, it can also be used as the temperature sensing element of the assembled thermocouple, and can directly measure the temperature of liquid, steam and gas medium and solid surface within the range of 0 ℃ - 400 ℃ in various production processes.
    Brand: YOYIK
12 Next > >> Page 1 / 2