page_banner

Press Sensor

  • Pressure Switch ST307-V2-350-B

    Pressure Switch ST307-V2-350-B

    Pressure switch ST307-V2-350B is usually used as an action indicator signal in protection and automatic control devices for AC and DC operations. The relay adopts imported ultra-small components, with reasonable layout and structure of electronic circuit design. The pressure switch is driven by an adjustable loading spring operating board. The spring load holds the operating plate on the switch until hydraulic pressure is applied to the small piston to force the operating plate far away from the close to switch contacts. When the hydraulic pressure drops by a small difference, the switch will reset.
  • Differential Pressure Switch CMS

    Differential Pressure Switch CMS

    The Differential Pressure Switch CMS integrates electrical communication with target communication, enabling both electrical and target communication. If a malfunction occurs in an electrical component or circuit, causing the electrical signal to fail to alarm, the visual signal at the other end can still accurately alarm, thus improving the reliability of the transmitter.
    Brand: YOYIK
  • Coal Feeder Load Cell AC19387-1

    Coal Feeder Load Cell AC19387-1

    The load cell AC19387-1 is an important accessory on the coal feeder. The load cell AC19387-1 used on the coal feeder is gravity sensor, belongs to the scope of force-sensitive sensor; it normally uses the metal resistance strain gauge as a force change detection device.
  • Differential pressure transmitter CS-III

    Differential pressure transmitter CS-III

    The pressure difference transmitter CS-III is used to alarm the blockage of the oil filter in the form of a switch, or to cut off the control circuit related to the hydraulic system in the form of a switch, in order to ensure the safe and normal operation of the main engine and hydraulic system.
    Brand: YOYIK
  • CS-V hydraulic system filter Differential pressure transmitter

    CS-V hydraulic system filter Differential pressure transmitter

    The function of the differential pressure transmitter CS-V is to instruct the staff to clean or replace the filter element in time after the filter element of the oil filter is blocked.
  • Hydraulic Adjustable Pressure switch ST307-350-B

    Hydraulic Adjustable Pressure switch ST307-350-B

    A range of piston-operated pressure switches for general applications where an electrical signal is needed to indicate a given pressure condition in a hydraulic circuit. The microswitch is actuated by the operating plate of an adjustable loading spring. The spring load holds the operating plate against the switch until applied hydraulic pressure on a small piston forces the operating plate away from the switch to change over the switch contacts. The switch will reset when the hydraulic pressure falls by a small differential.